LabelTac Pro X - Sensor Calibration

LabelTac
®
Pro X | REFERENCE GUIDE
Menu Sensor
Auto Calibration
Manual Setup
Threshold Detect
Gap
Gap
Maximum Length
Black Mark
Black Mark
Auto
Advanced
Continuous
Continuous
Fixed
Sensor
This option is used to calibrate the selected sensor. We recommend
calibrate the sensor before printing when changing the media.
Item Description Default
Auto Calibration
Printer will feed 2 to 3 gap labels to calibrate the sensor sensitivity
automatically.
N/A
Manual Setup
In case “Auto calibration” cannot apply to the media, please use “Manual
setup” function to calibrate the sensor sensitivity.
N/A
Threshold Detect
This option is used to set sensor sensitivity in xed or auto.
Auto
Maximum Length
This option is used to set the maximum length for label calibration.
254mm
Advanced
This function can set the minimum paper length and maximum gap/bline
length for auto-calibrate the sensor sensitivity.
OFF