Labino Apollo 1.0 - The Peak Function; The Hold Function

8
d) Return to the measuring screen by either pressing <<< twice or by pressing
the “Peak” button once.
e) If no key has been pressed within 1 min, the Hand Unit will automatically
return to the main menu.
2.6 The peak function
Aer the “Peak” button is pressed while you are on the measuring screen, the
Hand Unit shows the largest measured value since the button was pressed. A
small triangle can be seen in the display (see Figure 5). To deactivate the peak
function, press the “Peak” button again.
2.7 The hold function
Aer the “Hold” button is pressed while you are on the measuring screen, the
Hand Unit will show the latest measured value and does not change. A small
“H” can be seen in the display (see Figure 6). To deactivate the hold function,
press the “Hold” button again.
Peak function
activated
Figure 5
Hold function
activated
Figure 6