9
3. PAIRING SENSOR UNITS
e Sensor and the Hand Unit are paired by the factory. Only one Hand Unit
and one Sensor Unit can be paired at one time. In case of a double kit, the Sensor
Unit and the Hand Unit can be paired manually.
a) Select SENSOR UNITS in the main menu.
b) You see a submenu that looks like this
D588647BB843
NEW SENSOR
<<<
e rst line shows the unique ID of the Sensor Unit (12 characters, always
starting with a letter) that is currently paired with the Hand Unit. e ID is
printed on the label on the back side of the Sensor Unit.
c) Select NEW SENSOR. e Hand Unit it now disconnecting from the old
Sensor Unit and the display reads “Scanning …”.
d) Switch on the Sensor Unit you want to pair with.
e) A list of available Hand Units appears on the screen.
f) Select the desired Sensor Unit and press “Enter”.
g) Return to the measuring screen by either pressing <<< twice or by pressing
the “Peak” button once.
To Next Page
Loading...
Need help?
General