AATCC M6D Drying Machine Operation Instruction Version 2.0 Date: August 31, 2020.
A. Fabric Selector (Mode selection)
The standard program selection knob
There are three drying procedures which shown from Right to Left:
⚫ Normal / Permanent Press
⚫ Delicate
⚫ NO Heat
B. Display Screen
The display interface of the drying program
⚫ The right side of the screen shows the
duration in mins, the left side shows the
procedures.
C. Start or Stop /
Time Setting Control Knob
This knob is used for time setting and
start or stop the machine.
⚫ Drying time can be selected according
to the demand. Time decreases to the
right. Generally, the initial default is 70
minutes drying time.
⚫ Choose the appropriate time according
to the demand before drying load
mass.
To Next Page
Loading...