AATCC M6D Drying Machine Operation Instruction Version 2.0 Date: August 31, 2020.
VII.MAINTENANCE
Care of Your Dryer
1. The exhaust duct should be inspected after one year of use and cleaned if
necessary by a qualified service person to remove any lint build-up. Inspect
and clean exhaust duct every one to two years a required thereafter.
2. Keep dryer area clear and free from combustible materials, gasoline and other
flammable vapors and liquids.
3. Do not obstruct the flow of combustion and ventilation air.
Lint Filter
The lint filter is located at the front of the dryer in the lower part of the door opening.
Clean the Lint filter before drying each load. Remove lint filter cover, clean lint
filter and replace cover. Annually remove lint filter and screw to vacuum the duct
under it.
Motor Overload Protector
The dryer’s motor overload protector stips the motor automatically in the event of an
overload. After cooling, the overload protector will reset itself.
To Next Page
Loading...