To Next Page
O
ortizkatieAug 6, 2025
What to do if LaCie Storage 2big USB 3.0 is not recognized?
- RryanmorganAug 6, 2025
If your LaCie Storage device, the 2big USB 3.0, isn't being recognized, start by checking the interface cable connections at both ends to ensure they are fully seated. Disconnect, wait 10 seconds, and reconnect. If that doesn't work, restart your computer. Also, verify that the drive has been properly formatted. Finally, confirm that all power connections are working correctly, including the power supply, the outlet, and the on/off LED button on the drive.
General
