Replace the Right Arm Skin & Veins
Replace the right arm skin and veins
1. Take the new right arm skin and veins.
2. Carefully cut the old arm skin and peel it off.
3. Remove the veins from the hand.
4. Clean the arm with manikin wipes to remove old material.
Note
You can also use a 70% ethyl alcohol and water solution if you do not have manikin wipes.
5. Place the veins back over the hand and between the fingers
6. Apply small amounts of super glue where the veins touch the arm.
7. Press and hold the veins in place until the glue sets.
8. Turn the arm and continue the action on the rest of the arm.
9. Lubricate the inside of the new arm skin with liquid soap.
10. Put the arm skin on the manikin’s arm.
Note
If needed, apply more liquid soap to make the arm skin slide on more easily.
www.laerdal.com
© 2022 Laerdal Medical AS. All rights reserved. 00079659 Rev A
To Previous Page
Loading...
Need help?
General
