Need help?Do you have a question about the laerdal SimPad and is the answer not in the manual?
General| Manufacturer | Laerdal |
|---|---|
| Connectivity | USB |
| Compatibility | Laerdal manikins and simulators |
| Display Type | Touchscreen |
| Power Source | Rechargeable Lithium-Ion battery or AC adapter |
| Operating Temperature | 40°C (104°F) |
| Storage Temperature | -20° to 60° C (-4° to 140° F) |
Initial device configuration steps.
Steps to power off the SimPad device.
How to configure the device after initial setup.
Steps to power on the Link Box device.
How SimPad communicates with the Link Box using WiFi.
How to choose a scenario in Automatic Mode.
How to run a simulation session in Automatic Mode.
Steps to end a simulation session.
How to adjust simulation parameters in Manual Mode.
How to create new simulation states.
Real-time feedback for CPR performance.
To Next Page
