Contents
3
Intended Use
2
Intended Use 2
SimPad Overview 4
Link Box Overview 5
SimPad PLUS Overview 6
Link Box PLUS Overview 7
SimPad Setup 8
Link Box Setup 10
SimPad Setup 12
SimPad PLUS Setup 14
SimPad Setup 16
Link Box Setup 17
System Setup 18
Home Screen Overview 20
Automatic Mode 21
Manual Mode 25
QCPR 33
Simulated Patient Monitor 38
Options - SimPad 41
Options - SimPad PLUS 42
Network 44
Network - SimPad 46
Network - SimPad PLUS 47
SimStore 49
Software 51
Sounds 52
Laerdal Li-Ion Battery - SimPad 54
Laerdal Li-Ion Battery - SimPad PLUS 55
Laerdal Li-Ion Battery 56
Features 57
For further information and to access all product downloads visit www.laerdal.com/SimPad.
The SimPad System is an easy to use wireless tool that performs relevant medical
simulation training, including debriefing, in various user settings. With a large, intuitive
touch screen, SimPad is a “Pick up and Play” experience, delivering simulation-based
education, easily and efficiently.
There are two ways to control simulations: Automatic Mode and Manual Mode.
This allows customized simulations to meet specific needs.
The SimPad System is compatible with a broad range of Laerdal products including
manikins, patient simulators, and task trainers as well as standardized patients.
This User Guide describes operating instructions for the following models:
• SimPad
• Link Box
• SimPad PLUS
• Link Box PLUS
SimPad and Link Box, when used throughout this User Guide, applies to both SimPad PLUS
and Link Box PLUS models, unless otherwise specified.
Items included may vary in appearance and are subject to change.