Please read all information in this manual
carefully in order to gain maximum
performance, safety and enjoyment from your
Lafree electric bicycle.
Congratulations! You have just pedalled into
the exciting world of electric power assistance
for bicycles. In addition to being a full-featured
bicycle, Lafree has an integrated on-board
electric power assist unit. The power assisted
pedal and Variable Power Control (VPC
Throttle) systems are both easy to use and
understand. However, due to their
sophisticated technology, it is extremely
important that you follow the directions for
their operation carefully and completely.
Failure to do so could cause damage to the
motor, energy set (battery pack/charger unit),
VPC Throttle components, or the entire
bicycle.
Even though Lafree functions as a standard
bicycle, you should still review the chapters on
bicycle operation, especially if you haven’t
ridden/owned a bicycle within the last 10
years. Component performance and
configuration has changed dramatically, and
while they are easy to use and understand,
they may not look quite the same as what you
are familiar with! Taking a few moments now
to understand Lafree’s operating procedures
will help you get the most out of every ride.
Please read chapter 6, “Charging the Energy
Set” before operating Lafree’s electric
powered functions. Lafree’s Energy Set
(Battery Pack/Charger Unit) must be charged
completely before motor (power assisted
pedal, Variable Power Control) can be
operated.
1.1 Trademarks
The following trademarks are registered
trademarks of Lafree in Europe and other
countries.
• Lafree
®
• VPC
®
3
1
READ THIS MANUAL!
ENGLISHNEDERLANDSFRANÇAISDEUTSCH
0288 Opm Binnenwerk 11-02-2000 10:46 Pagina 3
To Next Page
Loading...