Do you have a question about the Lagoon 420 and is the answer not in the manual?
Engine | 2 x 40 HP |
---|---|
Cabins | 4 |
Builder | Lagoon |
Beam | 7.50 m |
Displacement | 12, 000 kg |
Fuel Capacity | 300 L |
Berths | 8 |
Length Overall | 12.8 m |
Key boat identification details, including builder and design category.
Details the physical measurements of the boat, such as length, beam, and draught.
Lists weights of various equipment and consumables, crucial for load calculations and stability.
Covers sail dimensions, areas, and maintenance of the rigging system.
Details sail configurations for different wind speeds to ensure safe sailing and prevent mast failure.
Addresses fire risks, firefighting equipment, and recommended extinguisher placement.
Offers general advice and specific maintenance guidelines to prevent fires and ensure safety.
Discusses factors affecting visibility from the helm station and the importance of COLREGS.
Provides crucial information on maintaining stability and preventing flooding, especially in adverse conditions.
Offers advice on preventing crew from falling overboard, including checks of guardrails.
Emphasizes reading the life raft manual and identifies stowage points.
Covers operating advice for the engine, including refuelling, ventilation, and safety precautions.
Details the location and capacity of the fuel tanks and associated fillers and cutoffs.
Describes the steering system, including maintenance checks and the use of the emergency tiller.
Explains the 12V/24V and 110V/220V electrical systems, including safety precautions.
Identifies the locations of key electrical components, switches, and appliances on the boat.
Details the functions and fuse ratings for the main switchboard and electrical circuits.
Covers the gas system, including the gas cooker, safety precautions, and system plan.
Provides safety advice for using spirit stoves, including fuel handling and ventilation.
Describes the characteristics of freshwater and holding tanks and operating the black water system.
Details pumps, seacock operation, and the identification of various hull fittings and drains.