Lagoon 421 - Plumbing

LAGOON 421
6
ELECTRICITY
63
During mast-stepping insert the cables through the base of the
mast.
The connection is made at the switch box on the mast bulkhead.
See LAUNCHING chapter.
Do not install electronic instruments or repeaters less than 1,50 m
away from the radio loudspeakers,if your boat has them.
Do not place the autopilot compass less than 0,50 m away from the
electrical harnesses.
• ELECTRONICS PACKS (OPTIONS)
Different electronics packs are offered on option.
Shore power socket
DANGER
Never let the end of the boat/shore supply cable hang in the
water: The result may be an electric field liable to hurt or kill
the swimmers nearby.
RECOMMENDATION
In order to reduce the risks of electic shock and fire:
- Before you plug in or unplug the boat/shore supply cable,
switch off the shut off device connected to the shore sup-
ply.
- Plug in the boat/shore supply cable in the boat before you
plug it into the shore supply socket.
- Unplug the boat/shore supply cable on shore first. Close
the shore socket cover.
- Do not modify the connections of the boat/shore supply ca-
ble.
Mast harness
Electronics
RECOMMENDATION
For your electrical requirements, we recommend you con-
sult a specialist or our network of technicians.
ELECTRICITY