Lathe with the box removed
Unpacking your machine.
To unpack your machine you will need tin snips, knife star screwdriver and a wrench.
1/ Using the tin snips cut the banding that is securing the packing box [If fitted].
WARNING: EXTREAM CAUSION MUST BE USED BECAUSE THE
BANDING WILL SPRING AND COULD CAUSE INJURY.
2/ Dismantle the box
3/Using the knife cut the plastic wrap. The accessories that were ordered are in the
box.
4/ Remove the base mounting bolts
that secure the machine to the base of
the box.
5/ To remove the lathe from the pallet,
use a fork lift truck or a hoist with
suitable slings with a lifting capability
of 2000 Kg [4400lb].
Note The machine is heavy; ensure
that you have sufficient people.
Note: If you have any doubt about the
described procedure, seek professional
assistance. Do not attempt any
procedure that you feel is unsafe or
that you do not have the physical capability of achieving.
To Next Page
Loading...
