Need help?Do you have a question about the laguna 16HD and is the answer not in the manual?
Safety guidelines for bandsaw operation, emphasizing caution and proper use.
Explains the function of the upper and lower flywheels in blade tensioning and tracking.
Describes the U-shaped frame housing the bandsaw components.
Details the table's function, tilt capability, and insert.
Explains the purpose and adjustment of blade support guides.
Emphasizes the importance and location of safety guards.
Covers the motor and its role in powering the bandsaw.
Instructions for connecting the bandsaw to an electrical power supply.
Explains the function of the foot brake for motor and flywheel stopping.
Highlights the importance of dust extraction and connection requirements.
Locates the machine's identification plate with manufacturing data.
Describes the scale used to indicate blade tension.
Details the mechanism for adjusting blade tracking and tension.
Describes the fence's function and adjustability for parallel cuts.
Explains how to install and adjust the removable table insert.
Steps for installing a new bandsaw blade, including safety.
Describes how to properly tension the bandsaw blade for optimal performance.
Step-by-step guide for safely removing the blade.
Discusses optimal blade placement on the wheels for cutting.
Notes and tips for maximizing performance from the Laguna guide system.
Details adjustment of the top guide assembly for blade tracking.
Explains adjustments for the lower blade guide for proper blade support.
Explains the process of making straight cuts along the wood grain.
Describes the first method for fence adjustment using a pencil line.
Describes the second method for fence adjustment by centering the blade.
Discusses available height positions for the fence.
Overview of blade selection and use as a general guide.
Defines key terms related to bandsaw blades like set, thickness, and pitch.
Discusses how wood hardness influences blade pitch selection.
Defines blade width and kerf, and their impact on cutting.
Describes tooth angle, area for sawdust, and tip angle.
Discusses blade stiffness and provides selection recommendations.
Lists common reasons for bandsaw blade failure and how to correct them.
Identifies factors leading to blade dulling and how to prevent it.
Instructions for cleaning bandsaw tires and maintaining their shape.
Guidance on inspecting, replacing drive belts, and bearing maintenance.
Describes table insert care, replacement, and adjustment.
Details vertical and horizontal adjustment steps for the lower wheel tracking.
Steps for adjusting the top guide for proper blade tracking.
Addresses issues like machine not stopping, motor not turning, or overheating.
Troubleshooting squeaking noises and loose/tight guide shafts.
Addresses blade slowing, tracking, kicking, clicking, and overheating.
Identifying causes and solutions for machine vibration.
To Next Page
General
