To Next PageTo Next Page
Need help?Do you have a question about the laguna 18bx and is the answer not in the manual?
Details the warranty terms and conditions provided by IGM Tools & Machinery.
Identifies and describes all components of the 18BX bandsaw.
Provides detailed technical specifications and measurements for the bandsaw.
Details the sound pressure level and uncertainty according to EN ISO standards.
Essential safety guidelines and precautions for operating the bandsaw safely.
Instructions for inspecting and safely unpacking the machine upon delivery.
Step-by-step guide for unpacking the bandsaw from its packaging.
Lists the components and accessories included with the bandsaw purchase.
Guidelines for selecting a suitable and safe location for operating the bandsaw.
Recommendations for securing the machine to prevent unauthorized operation.
Instructions for attaching the rubber feet to the bandsaw.
Guide to fitting the optional mobility kit for easier machine movement.
Step-by-step instructions for mounting the bandsaw table.
How to attach and adjust the table rule for fence alignment.
Instructions for assembling and attaching the rip fence to the bandsaw.
Guide to installing the table insert and fence stopper components.
Instructions for installing the optional work light.
Guidance on properly connecting the bandsaw to the electrical power source.
Pre-operation checks and safety precautions before using the bandsaw.
Detailed procedure for safely installing a bandsaw blade.
Instructions on how to align the blade for optimal cutting performance.
Instructions for aligning and setting the rip fence for straight cuts.
How to set the table rule to match the fence position for accurate measurements.
Guide on adjusting the rip fence to its high or low position.
Procedure for ensuring the bandsaw table is perpendicular to the blade.
Methods to correct fence alignment for straight cuts.
Detailed procedure for safely installing a bandsaw blade.
Instructions on how to align the blade for optimal cutting performance.
Procedures for correctly tensioning the bandsaw blade.
Guide to adjusting the blade guards for safe and effective operation.
Procedure for setting the ceramic blade guides for optimal performance.
Methods to correct fence alignment for straight cuts.
How to set the table rule to match the fence position for accurate measurements.
Instructions for cleaning and maintaining the bandsaw tires.
Recommendations for protecting the bandsaw from rust.
Details on the adjustment of the blade guide rack and pinion mechanism.
Procedure for adjusting the back blade guide's forward and backward movement.
Steps for replacing and tensioning the drive belt.
Information on the table insert and its adjustment.
Maintenance and inspection advice for the blade guides.
Information regarding the sealed bearings and their maintenance.
Guidance on adjusting the brake mechanism for proper function.
Troubleshooting steps for when the bandsaw fails to start.
Steps to resolve issues where the machine fails to stop.
Diagnosing and fixing motor issues where it attempts to start but doesn't turn.
Identifying causes and solutions for the motor overheating.
Troubleshooting sources of squeaking noises from the bandsaw.
Addressing issues with the tightness or looseness of the upper guide shaft.
Steps to diagnose and fix blade speed reduction during cutting.
Solutions for problems with the blade not tracking correctly on the flywheels.
Troubleshooting causes for the blade kicking during operation.
Identifying and resolving the cause of clicking noises from the blade.
Diagnosing and fixing issues causing the blade to overheat.
Troubleshooting and resolving vibrations experienced by the machine.
General
