Lake Shore Model 102 User’s Manual
1-2 Introduction
Table 1-1. Model 102 Specifications
Output Current: 10 µA factory set; internally programmable
from 1 µA to 1 mA.
Accuracy: 0.05% of output at 10 µA
Temperature Coefficient: 0.005% per °C
Compliance Voltage: 8 volts
AC Current Ripple: Less than 0.01% of scale +1 nA (RMS) in a
properly shielded system
Line Regulation: Less than 0.01% change in output for
10% change in line voltages within specified range
Load Regulation: Less than 0.01% change in output current
from 1 to 100% of compliance voltage
Connections: Current output via standard banana jacks
Ambient Temperature Range: 15 – 35 °C (59 – 95 °F)
Power: 90 – 125 or 210 – 250 VAC, 50/60 Hz,
External Wall Mount AC Transformer
Size: 95 × 33 × 158 mm (3.7 × 1.3 × 6.2 inches)
Weight: 0.3 kilograms (0.7 pounds)
NOTES
1. Product Specifications are subject to change without notice.
2. The electrical specifications given are for a unit operating at the
factory at current output of 10 µA; a different output current may
affect some specifications.
To Next Page
Loading...
