a) Repeatedly tap the “MODE” button to toggle between video/camera/gallery.
b) Camera menu has 3 sections – basic camera settings/video configuration/photo settings. To toggle between these use the “MENU” button,
which also serves to access the menu. Under each section move vertically using the “UP” and “DOWN” arrows and select by pressing “OK”.
c) To independently change the settings in video/photo mode, you must access the settings from the relevant mode. Therefore, you can only
enter video settings in video mode and photo settings in photo mode.
d) To go back a level use the “MENU” button. To completely exit the setting, press the “MODE” button.
5. Recording / taking photos / gallery
a) To start the camera recording press the “OK” button. Press it again to stop recording. The camera must be in record mode.
b) Automatic recording – the automatic recording function is always enabled. Automatic recording starts after connecting the camera to a power
supply. If the car’s power only starts after the ignition is turned on then the camera turns on and starts recording when the car is started.
c) Automatically start/stop recording – the camera automatically stops recording and turns off after the engine is turned off and the power cut. In
some cars the cigarette lighter is powered permanently. In this case, be sure to unplug the cable from the cigarette lighter.
d) Take photos by pressing the “OK” button. The camera must be in photo mode.
e) After switching to the gallery, which displays a list of recorded videos and photos, navigate between these using the “UP” and “DOWN”
arrows. To start and stop a recording press the “OK” button.
6. Deleting the entries on the camera
a) Deleting material directly on the camera – can be done in the gallery. After pressing the “MENU” button, select “Delete” and then “Current
image”.
b) Deleting all entries – can be done in the gallery. After pressing the “MENU” button, select “Delete” and then “Delete all”.
7. Protecting the files on the camera.
a) Locking the current entry – can be done in the gallery. After pressing the “MENU” button, select “Lock” and then “Lock the current image”.
b) Locking all entries – can be done in the gallery. After pressing the “MENU” button, select “Lock” and then “Lock all images”.
c) Unlocking the current entry – can be done in the gallery. After pressing the “MENU” button, select “Lock” and then “Unlock current image”.
d) Unlocking all entries – can be done in the gallery. After pressing the “MENU” button, select “Lock” and then “Unlock all images”.
8) Connecting to a PC
Camera can be connected to a PC via the supplied mini USB cable and use it as USB storage.
LAMAX C3 car camera settings – video mode
1. Video resolution
Video resolution can be set in the video settings menu. The video settings menu is accessed by pressing “MENU” in video mode. Use the “UP”
and “DOWN” arrows to scroll to “RESOLUTION” and choose one of the options – 1920×1080, 1440×1080, 1280×720, 848×480 or 640×480.
2. Exposure
Lets you adjust the exposure as needed. Video recording exposure can be adjusted from -2 – +2 in steps of 1/3.
3. Motion detection
When motion detection is activated it automatically starts recording the moment movement is detected in the visual field of the lens. The camera
stops recording after motion ceases.
4. Audio recording
Lets you disable audio recording and prevent unwanted audio recordings. Audio recording can also be turned on and off using a quick function.
5. Display data
Date and time can be inserted into the recording.
6. G-sensor
Connected to other functions of the car camera. It can be set to different sensitivity levels (2G, 4G, 8G), with the highest sensitivity being 2G and
the lowest 8G. Setting the correct sensitivity affects other functions of the camera. For the correct functioning of “Parking mode”, we recommend
a higher sensitivity for recording minor impacts (parking, vandalism).For the proper functioning of file lock, we recommend a lower sensitivity to
minimise the unwanted locking of files, for example when driving on uneven terrain. The icon indicating that the G-sensor is turned on is on the
left of the display.
LAMAX C3 car camera settings – photo mode
1. Image resolution
Image resolution can be set in the photo settings menu. The photo settings menu is accessed by pressing “MENU” in photo mode. Use the “UP”
and “DOWN” arrows to scroll to “RESOLUTION” and choose one of the options – 12 MP, 10 MP, 8 MP, 5 MP, 3 MP, 2 MP, 1.3 MP and VGA.
2. Photo burst
Allows a series of 5 shots to be taken in 1 second at the touch of a button.
3. Exposure
Adjusts exposure as needed. The photo exposure can be adjusted from -2 – +2 in steps of 1/3.
4. Preview
View a photo on the display immediately after the shot has been taken, without having to switch to the gallery. Display time can be set to 2 or 5
seconds or off completely.
5) Display data
Inserts date and time when taking a photo.
LAMAX C3 car camera basic settings
1. Parking mode
Turn on parking mode and the camera starts recording when there is a collision or attempted break-in. It can be set to different sensitivities (2G,
4G, 8G), with the highest sensitivity being 2G
and the lowest 8G. It can be easily turned on or off using a quick function. Parking mode can be enabled for 24 hours without recharging.
2. Date/Time
Sets the date and time on the device. You can chose the format of the displayed data.
3. Automatic power off
Allows you to set auto power off after 1 or 3 minutes.
4. LCD off
Sets the display to automatically turn off after 3, 5 or 10 minutes.
To Next Page
Loading...
