buildings emitting strong radio waves such as antennas. Strong magnetic fields and radio waves can cause damage to the camera or damage to
the captured images and audio recordings.
3. Do no expose the camera to high temperatures or direct sunlight.
4. Use only micro SDHC cards from reputable brands. Cards from generic manufacturers do not guarantee proper data storage functioning.
5. Do no place the micro SDHC card near a magnetic field or a source of static electricity. This will prevent the loss of stored data.
6. In the event that the device overheats whilst charging, gives off smoke or a suspicious odour, unplug the device immediately and stop charging.
7. Whilst charging, keep the device out of reach of children. Power cable can cause electric shock or asphyxiation to a child.
8. Store in a cool, dry and dust-free environment.
Precautions and notices
— For your own safety, do not use the camera’s controls while driving.
— A window mount is needed when using the recorder in a car. Make sure that you place the recorder in an appropriate place, so as not to obstruct
the driver’s view or deployment of airbags.
— Make sure that no object is blocking the camera lens and no reflective material is placed near the lens. Please keep the lens clean.
— If the car’s windshield is tinted or coated, it may impact the recording quality.
Safety precautions
— Use only the charger supplied with your device. Use of another type of charger may result in malfunction and/or danger.
— Do not use the charger in high moister environment. Never touch the charger when your hands or feet are wet.
— Allow adequate ventilation around the charger when using it to operate the device or to charge the battery. Do not cover the charger with paper or
other objects that will reduce cooling. Do not use the charger while it is inside a carrying case.
— Connect the charger to a proper power source. The voltage requirements are found on the product case and/or on the packaging.
— Do not use the charger if it is visibly damaged. In case of damage, do not repair the equipment yourself!
— In case of device overheating, immediately disconnect the power source.
— Charge the device under supervision only.
Caring for your device
— Taking good care of your device will ensure trouble-free operation and reduce the risk of damage.
— Keep your device away from excessive moisture and extreme temperatures and avoid exposing your device to direct sunlight or strong ultraviolet
light for extended periods of time.
— Do not drop your device or subject it to severe shock.
— Do not subject your device to sudden and severe temperature changes. This could cause moisture condensation inside the unit, which could
damage your device. In the event of moisture condensation, allow the device to dry out completely before use.
— The screen surface can easily be scratched. Avoid touching it with sharp objects.
— Never clean your device when it is powered on. Use a soft, lint-free cloth to wipe the screen and the exterior of your device. Do not use paper
towels to clean the screen.
— Never attempt to disassemble, repair or make any modifications to your device. Disassembly, modification or any attempt at repair could cause
damage to your device and even bodily injury or property damage and will void any warranty.
— Do not store or carry flammable liquids, gases or explosive materials in the same compartment as your device, its parts or accessories.
— To discourage theft, do not leave the device and accessories in plain view in an unattended vehicle.
— Overheating may damage the device.
Other information
1. For households: This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent
possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling. In case of incorrect disposal of this kind of wastes user can be fined
according to national laws. User information for disposal of electric and electronic devices in countries outside the EU: The symbol stated above
(crossed recycle bin) is valid only in countries in European Union. For correct disposal of electric and electronic devices ask your city hall or
distributor of these devices. Everything is expressed by the symbol of crossed recycle bin on product, cover or printed materials.
2. You can determine a warranty service at the place of purchase. In case of technical problems or queries contact your dealer who will inform you
about the following procedure. Follow the rules for work with electric devices. User is not allowed to disassembly the device neither replace any
of its components. To reduce the risk of electric shock, do not remove or open the cover. In case of incorrect setup and plug in of device you will
expose yourself risk of electric shock.
Declaration of Conformity
Hereby, elem6 s.r.o., declares that all LAMAX products are in compliance with the essential requirements and other relevant provisions of Directive
2014/30/EU. Products are intended for sale without any restriction in Germany, Czech Republic, Slovak Republic, Poland, Hungary and other EU
countries. Products are covered for two years warranty, unless otherwise stated. You can download the Declaration of Conformity from the website:
www.lamax-electronics.com.
Manufacturer:
elem6 s.r.o.,
To Next Page
Loading...
