How to disable-enable the SOFT-START
By default the machine is provided with SOFT START system with gradual start of the wash pump.
It’s possible to disable this function by following the instructions below.
1. Close the hood of the machine;
2. Turn the machine off by pressing the wall switch,
3. Press the pushbutton ‘C’,
4. Always keeping pressed the pushbutton ‘C’, turn the machine on by pressing the wall switch,
5. Keep the pushbutton‘C’ pressed for 3 seconds,
6. Release the pushbutton and turn the machine off by pressing the wall switch.
To enable again the SOFT-START function, follow the same steps.
How to disable-enable the AUTOMATIC START
By default the machine is provided with AUTOMATIC start of the cycle at the hood closing.
It’s possible to set (enable) the MANUAL start by cycle pushbutton ‘C’ the by following the instructions
below:
1. Close the hood of the machine;
2. Turn the machine off by pressing the wall switch,
3. Press the Wash time selection pushbutton ‘B’,
4. Always keeping pressed the pushbutton ‘B’, turn the machine on by pressing the wall switch,
5. Keep the pushbutton ‘B’ pressed for 3 seconds,
6. Release the pushbutton and turn the machine off by pressing the wall switch.
To set again the Automatic start function, follow the same steps.
To Next Page
Loading...
