7.3.1 Menu 3-1 “ENABLE CHRONO”
Allows you to enable and disable all programmable thermostat functions. If the value is "off", all set
programmes are disabled.
7.3.2 Menu 3-2 “DAILY PROGRAMME”
Allows you to enable, disable and set all programmable thermostat functions.
After having set the first parameter (M-3-2-01) “DAILY CHRONO” to "on", you can set two start-ups and two
shutdowns. For each parameter, you can either set the value "off", if you do not wish to activate, or the time
of start-up or shutdown.
menu level selection meaning Possible values
03-02-02 START 1 activation time 00:00-23:50 -OFF
03-02-03 STOP 1 disable time 00:00-23:50 -OFF
03-02-04 START 2 activation time 00:00-23:50 -OFF
03-02-05 STOP 2 disable time 00:00-23:50 -OFF
To Next Page