7.10 Menu 10 “PELLET TYPE”
This menu allows you to simultaneously increase or decrease all pellet lowering parameters (quantity of
pellets and brazier loading).
The set default value is 00. Press keys (1) and (2) to modify said value from -9 to +9.
For each unit, pellet load times are increased or decreased by 2.5 %.
7.11 Menu 11 “FIREPLACE TYPE”
This menu allows users to simultaneously increase or decrease all smoke fan parameters (draft).
The set default value is 00. Press keys (1) and (2) to modify said value from -9 to +9.
For each unit, smoke motor revs are increased or decreased by 2.5%.
7.12 Menu 12 “FAN” (only specially designed models)
This menu allows you to activate or disable fan in HYDROVENTILATED models.
To Next Page