Lamona FLM8702 - Before First Use; Ensure Transit Bolts Removed; Running the First Programme; Opening Door After Programme

9
Exclusive to Howdens
Before using the washing machine for the first time
LAMONA cannot be held responsible
for any incorrect installation of the washing
machine.
Ensure transit bolts are removed.
This washing machine has undergone a complete
functional test at the factory and there may be
some water in the drum and detergent drawer.
Running the first programme
Opening the door at the end of
the programme
• Ensure water supply is switched on.
Run the machine EMPTY with a very small amount of
detergent and a 60° cycle quick wash.
• Turn the programme selector to the FAST 60’
position. Select Temperature 60°C.
• Press the Start/Pause button
The programme will start.
At the end of the programme, will be displayed.
• Turn the programme selector to the OFF
position to switch off the machine.