EasyManua.ls Logo

Lamona HJA2480 User Manual

Lamona HJA2480
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
60cm Extractor
LAM2401 Black
Instillation & User Instruction
HJA2480 Stainless Steel
Issue 4 Apr 2012
Question and Answer IconNeed help?

Do you have a question about the Lamona HJA2480 and is the answer not in the manual?

Lamona HJA2480 Specifications

General IconGeneral
TypeIntegrated
Width60 cm
LightingLED
Number of Speeds3
FinishStainless Steel
Grease filter typeAluminium
Number of Motors1
Control TypeSlider
MaterialStainless Steel
Filter TypeGrease

Summary

Environmental Note

Important Safety Information

Installation Safety and Qualifications

Stresses that installation must be by a qualified person and follow instructions.

Mounting Height and Clearance

Specifies the minimum 700mm installation height above the worktop.

Handling Precautions

Warns about sharp edges during handling and installation.

Specifications

Product Dimensions

Details the height, width, and depth measurements of the extractor unit.

Chimney Section Dimensions

Provides the dimensions for the chimney section of the extractor.

Extractor Features

Lists key features like motor type, speeds, filters, and lights.

Using Your Extractor

Initial Preparation and Cleaning

Guides on initial cleaning and polishing of stainless steel surfaces before first use.

Control Panel Operation

Explains the functions of the control panel buttons (ON/OFF, speed selection, light).

Cleaning Your Extractor

General Cleaning Instructions

Provides instructions for cleaning external parts, control panel, and filter grill.

Grease Filters Care

Details cleaning grease filters regularly to prevent fire hazards.

Maintenance

Removing and Cleaning Grease Filters

Step-by-step guide on how to remove, clean, and refit the grease filters.

Changing a Light Bulb

Instructions on how to safely replace a faulty light bulb in the extractor.

Fitting the Carbon Filters

Explains how to install carbon filters for recirculation mode and their replacement frequency.

Installation

Electrical Connection

Details electrical connection requirements, including fuse rating and earthing.

Before Beginning Installation

Lists essential checks and preparations before starting the installation process.

Installing Your Extractor

Provides guidance on physically mounting the extractor unit onto the wall.

Connecting to External Ducting

Explains how to connect the extractor to an external ducting system for air extraction.

Fitting the Chimney

Guides on how to assemble and fit the chimney sections of the extractor.

Completing the Installation

Details the final steps for completing the installation, including filter refitting and testing.

Troubleshooting

Extractor Will Not Start

Provides checks for when the extractor fails to power on or operate.

Extractor Not Working Effectively

Lists common reasons and checks for reduced extractor performance.

Extractor Switched Off During Operation

Explains causes for the extractor shutting off, like safety cut-out trips.

Your Guarantee

Reporting a Problem

Outlines the information required and steps to take when reporting an issue with the appliance.

Related product manuals