To Next PageTo Next PageWhat to do if my Lamona LAM2377 does not operate?
If your Lamona Ventilation Hood isn't working, the main fuse might be defective or tripped. Check the fuses in the fuse box and replace or reset them if needed. Also, ensure that all power connections are properly connected.
Why does my Lamona Ventilation Hood have poor extraction?
Poor extraction in your Lamona Ventilation Hood can stem from a few issues. The ducting might be the wrong size, or there could be obstructions in the ducting or outlet. Also, exceeding the recommended number of 90° ducting bends or the ducting running too long can reduce efficiency. Make sure the cooker hood is switched on 10 minutes before and after cooking. To resolve this: * Check that the cooker hood is using the correct size ducting. * Check there are no restrictions within ducting or outlet. * Check that the installation does not exceed the minimum recommended number of 90° bends. * Check that the installed ducting does not exceed the recommended run length for the model installed. * Ensure the cooker hood is switched on 10 minutes before and after cooking.
General| Type | Chimney |
|---|---|
| Width | 60 cm |
| Noise Level | 65 dB |
| Number of Speeds | 3 |
| Lighting | LED |
| Number of Motors | 1 |
| Material | Stainless Steel |
| Filters | Aluminum |
