What to do if my Lamona Ventilation Hood does not operate?
If your Lamona Ventilation Hood isn't working, start by checking all power connections to ensure the product is properly connected. Also, verify the mains fuse is not defective or tripped.
How to fix a Lamona Ventilation Hood when the light works but the fan doesn't?
If the light on your Lamona Ventilation Hood is working but the fan isn't, the motor temperature may have exceeded its limit, causing the thermal fuse to trip. Switch off the extractor and allow it to cool down so the fuse can auto-reset. Also, check the filter condition and clean or replace it as required.
What to do if the motor is on but the fan is not efficient in my Lamona Ventilation Hood?
If the motor of your Lamona Ventilation Hood is running, but the fan doesn't seem as effective, clean the grease filters with warm water and mild detergent, and replace any charcoal filters if fitted. Additionally, ensure that the venting is not obstructed.
Why do the lamps fail to operate on my Lamona Ventilation Hood?
If the lamps on your Lamona Ventilation Hood aren't working, check the fuses in the fuse box and replace or reset them if necessary. Also, the lamp may have reached the end of its usable life.
Why do smells linger even when my Lamona Ventilation Hood is working?
If your Lamona Ventilation Hood is working normally but smells still linger, clean the grease filters with warm water and mild detergent, and/or replace any charcoal filters.
General| Brand | Lamona |
|---|---|
| Model | LAM2475 |
| Category | Ventilation Hood |
| Language | English |
To Next Page
