Why is my Lamona LAM2950 performance so poor?
If your Lamona Ventilation Hood isn't performing well, it could be due to several reasons. The grease filters might be clogged and require washing. Alternatively, the vent ducting might be too long, have too small a diameter, or have too many bends, requiring a check of the installation. Also, the Ventilation Hood might be mounted too high above the hob.
What to do if smells linger after using Lamona Ventilation Hood?
If smells linger after using your Lamona Ventilation Hood, it's likely that the grease filters are clogged and need to be washed.
How to fix a Lamona LAM2950 Ventilation Hood that does not operate?
If your Lamona Ventilation Hood isn't operating, check the Ceiling Hood for any obvious issues and make sure that the mains fuse or breaker hasn't tripped. If it has, replace the fuse or reset the breaker.
What to do if the lamp does not operate on Lamona Ventilation Hood?
If the lamp on your Lamona Ventilation Hood isn't working, it's likely due to a defective lamp module. Call service line to resolve this issue.
General| Type | Chimney |
|---|---|
| Width | 60cm |
| Number of Speeds | 3 |
| Lighting | LED |
| Filter Type | Aluminum Grease Filter |
| Control Type | Push Button |
| Material | Stainless Steel |
Displays common symbols used in the manual for user guidance and warnings.
Provides advice on optimizing product performance and reducing environmental impact.
Explains steam condensation on hood surfaces during cooking and its causes.
Essential safety rules for appliance usage, maintenance, and child safety.
Precautions to prevent fire hazards, including cleaning and operational limits.
Specifies necessary ventilation measures for safe and effective hood operation.
Critical safety instructions related to the appliance's electrical connections and wiring.
Lists included parts and illustrates the physical layout of the ceiling hood.
Explains the function of each button on the hood's control panel.
Guides users on operating speed selection, light control, and timer functions.
Details battery replacement and the process to connect and use the remote control.
Provides methods for cleaning the exterior surfaces of the appliance.
Explains how to remove, clean, and refit the grease filters.
Details the process for installing and replacing carbon filters for recirculation.
Guides on how to safely change the LED lamps in the hood.
Describes different ways the hood can extract air (ducted vs. recirculating).
Ensures the area and product are suitable before starting the installation process.
Step-by-step guide for installing the hood in a surface-mounted recirculating configuration.
Details on how to safely connect the appliance to the mains electricity supply.
Instructions for installing the hood in semi or fully recessed ducted configurations.
Details key product specifications including wattage, voltage, dimensions, and fitted components.
Provides common issues, possible causes, and solutions for product malfunctions.
To Next Page
