234
8 CO/O
2
Control
NOTICE
No CO control possible without stored O
2
setpoint curve!
Without activated O
2
trim (setting 1 ... 4) no CO control!
If the CO control is switched off or malfunctioning, the O
2
controller takes over depending on
the fuel.
For more information see chapter Activating O2 Trim
Optimising the CO Control
NOTICE
Access level 1 is required.
Enter the password for access level 1, see chapter 7.3.3.3 Access Rights Menu.
Fig. 8-27 Open the CO controller menu
Fig. 8-26 Activation of the CO control in the drop-down menu
To Next Page
Loading...
Need help?
General
