8
1 General Infomation
Purpose internal
firing rate
controller
This software option enables the calculating of the burner's required load setting continuously
for a specified setpoint value (referred e.g. to temperature or pressure), through comparison
with the actual value. This load setting can be notified internally to the electronic compound
as the specified value.
Purpose internal
O2-regulation
(option)
This software function makes it possible to regulate one or several actuators independently of
a switched-on O
2
actual value. By using a self-optimising regulator strategy, it is also possible
to regulate burners with frequent load changes.
To Next Page
Loading...
