Lamtec GFI 48 User Manual

www.lamtec.de
Sensors and Systems for Combustion Engineering
Operating Instructions
Ignition and Pilot Burner
GFI 48 / 70 / 89 and Ex Variants

Lamtec GFI 48 Specifications

General

Brand	Lamtec
Model	GFI 48
Category	Burner
Language	English

Summary

1. Manual Information

1.1 Document Purpose and Scope

Instructions facilitate safe and efficient handling of the pilot burner GFI and its variants.

1.2 Intended Users

Instructions must be read and understood by personnel before commencing any work.

1.3 Manual Preservation

Manual must be kept safe and accessible to personnel throughout the device's service life.

2. Safety Instructions

2.1 Safety Symbol Definitions

Defines symbols (DANGER, WARNING, CAUTION, NOTICE) used to convey safety information.

2.2 Product Safety Standards

Product complies with safety rules. Use only in perfect condition and according to manual.

2.3 Product-Specific Hazards

Warnings for installation, commissioning, and operation of electrical devices and flame scanners.

2.4 Proper Use and Installation

Covers intended use, conditions of use, and essential installation guidelines.

3. Product Details

3.1 Package Contents

Details the components included in the product's delivery package.

3.2 Rating Plate Information

Information on the rating plate located on the pilot burner housing.

3.3 Burner Equipment Versions

Details the different versions (A, B, C) of the pilot burner and their components.

3.4 Installation Materials

Lists materials required for installation, not included in the scope of supply.

3.5 Product Lifespan

Discusses the device's limited lifespan and conditions affecting it.

3.6 Technical Specifications Overview

Presents comprehensive technical specifications for GFI pilot burners and accessories.

4. Design and Functionality

4.1 Burner Design

Describes the construction of pilot burner versions A and B, including main components.

4.2 Burner Functionality

Explains the operating modes of the pilot burner and the function of its components.

5. Commissioning Process

5.1 Transporting the Burner

Guidelines for safe transport of the pilot burner, considering its weight and bulk.

5.2 Assembly and Wiring

Instructions for assembly and detailed electrical connection for pilot burner versions A, B, and C.

5.3 Commissioning Steps

Safety regulations and steps for commissioning, including leak and functional tests.

6. Maintenance Procedures

6.1 Wear Parts

Details wear parts for the GFI pilot burner that require replacement.

6.2 Maintenance Readiness

Steps for preparing the system and burner for maintenance, including safety precautions.

6.3 Maintenance Procedure

Step-by-step instructions for performing maintenance on the pilot burner.

6.4 Service and Support

Contact details for LAMTEC Service/Support for questions or assistance.

6.5 Warranty and Delivery

Information regarding manufacturer's warranty conditions and terms of delivery.

7. Troubleshooting and Fault Rectification

7.1 Error Handling

Guidance on how to act correctly when an error occurs during operation.

7.2 Troubleshooting Guide

Provides a table of common faults, their causes, and rectification steps.

7.3 Repair Guidelines

Emphasizes safety-relevant repairs must only be done by the manufacturer.

7.4 Repair Service Information

Contact details for obtaining repair services from LAMTEC.

8. Decommissioning and Storage Guidelines

8.1 Burner Removal

Procedure for safely taking the pilot burner out of operation and removing it.

8.2 Storage Instructions

Instructions for storing the ignition burner properly after maintenance.

9. Disposal Procedures

10. EU Declaration of Conformity

11. Ordering Information