Lamtec VMS 4 User Manual

Appendix Switch and key combinations
O regulation
2
Action Modus Position of Position of Keys / other
top switch (1) bottom switch (2)
Mode switch-over: Status Automatic Channel 3 key (5)
O regulation-VMS/FMS or O regulation Open Z O regulation
22
2
Closed Z VMS/FMS
O error reset O - Status Automatic O regulation mode
2
22
regulation Press Acceptance key (3)
and query cause of error
Channel 3 switch (5)Z Open
Calling up text O - Status Automatic Press Acceptance key (3)
2
messages regulation or O regulation
2
Adjusting correction TK Load O regulation Channel key 1
2
value Open Z Excess air
Closed Z Air shortage
Changing O target T Set-point O regulation Channel key 4
22
value to "Adjust” Open Z more O
2
Closed Z less O
2
Calling up O regulation VMS/FMS Status Automatic Channel key 2
2
error history upwards/downwards
Cahnge load regulator load value Operation Cannel key 3 up, channel
key 4 down. When display
blinks, channel key 2 for c
hanging setpoint, store with
ENTER key
127

Lamtec VMS 4 Specifications

General

Brand	Lamtec
Model	VMS 4
Category	Control Systems
Language	English