To Next Page
J
juarezdavidAug 10, 2025
What to do if my Lanaform Accessories has no vapour and no indicator light?
- HhoganpriscillaAug 11, 2025
If your Lanaform Accessories has no vapour and the indicator light is off, there might be several reasons. First, ensure the device is properly plugged into a working mains supply. Then, check the water level in the tank and add water if it's too low. Also, make sure the top for adjusting the vapour power is correctly positioned and that the cable isn't obstructing the transducer. If the water tank is leaking, check the rubber stopper's position. Finally, if the device's temperature is too low, place it in a room at room temperature for about half an hour before using it.
General
