Lanaform Aroma Design

Other manuals for Lanaform Aroma Design

Questions and Answers

N
Nicholas WhitneyAug 10, 2025
What to do if my Lanaform Aroma Design Accessories has no vapour and no indicator light?
- L
  Lisa MoyerAug 10, 2025
  If your Lanaform Accessories has no vapour and the indicator light is off, there might be several reasons. First, ensure the device is properly plugged into a working mains supply. Then, check the water level in the tank and add water if it's too low. Also, make sure the top for adjusting the vapour power is correctly positioned and that the cable isn't obstructing the transducer. If the water tank is leaking, check the rubber stopper's position. Finally, if the device's temperature is too low, place it in a room at room temperature for about half an hour before using it.
M
Michelle MarshAug 20, 2025
Why does my Lanaform Aroma Design vapour have an unusual smell?
- A
  Anna GreenAug 20, 2025
  If the vapour from your Lanaform Accessories has an unusual smell, it's likely because the water has been sitting in the tank for too long. To resolve this, clean the tank thoroughly and refill it with fresh water.
G
Gina MccannAug 31, 2025
What to do if my Lanaform Accessories has low intensity?
- M
  Melissa Rivera MDAug 31, 2025
  If your Lanaform Accessories is producing vapour with low intensity, it could be due to several factors. Check the water level in the tank and either empty or fill it as needed. There might also be sediment on the transducer, so try cleaning it. Ensure you're using water at room temperature, and that the water is clean. If the water is unclean, clean the tank and fill it with fresh water.

Lanaform Aroma Design Specifications

General

Power	12 W
Water tank capacity	100 ml
Diffusion area	Up to 15 m²
Timer	Yes
Light therapy	Yes
Number of colors	7
LED Lights	Yes
Type	Aroma Diffuser
Operating modes	Continuous, Intermittent
Operating Time	Up to 6 hours
Material	Plastic
Auto Shut-off	Yes