LANBO LW177S - User Manual

Questions and Answers

A
Amy Lewis DDSAug 4, 2025
Why does my LANBO LW177S Kitchen Appliances refrigerator compressor start and stop frequently?
- C
  Cindy MaxwellAug 4, 2025
  Frequent starting and stopping of the compressor in your LANBO Kitchen Appliances refrigerator can stem from several causes. It might be due to a door gasket that doesn't seal properly; in this case, use low heat from a hair dryer to reshape the door seal. Another cause may be an incorrect sensor connection – consult the wiring diagram to ensure it's properly connected. A faulty sensor could also be the culprit, requiring a replacement with a new sensor. Lastly, opening the door too often can also cause this issue; try to reduce how frequently you open the refrigerator door.
J
jennifermorenoAug 14, 2025
How to fix a LANBO LW177S refrigerator that does not operate?
- A
  Amy ClarkAug 14, 2025
  To address a LANBO Kitchen Appliances refrigerator that isn't operating, first, press the ON/OFF button. Then, ensure the power plug is securely connected. If the issue persists, it is recommended to ask an engineer for help.
J
Jason DavisOct 24, 2025
What to do if LANBO Kitchen Appliances refrigerator is not cold enough?
- S
  stephanie28Oct 24, 2025
  If your LANBO Kitchen Appliances refrigerator isn't cooling down to the set temperature, several factors could be at play. The compressor may not be starting, or it could be in a self-protection mode due to high ambient temperature (over 38°C), poor air venting, a slow or faulty fan, or a door that isn't closed properly or is opened too frequently. Other potential causes include fans operating at low speed, evaporator icing, a poorly closed door (check the lock, shelves, and rubber seal), a dusty condenser (wash and clean it), or a cooling system fault like gas leakage or blockage. For compressor issues or cooling system faults, it's best to ask an engineer for help. If the fans stop working, power the refrigerator OFF and then ON again. Check the fan and whether the voltage is normal, if ...