EasyManua.ls Logo

LANBO LW28D - Page 19

LANBO LW28D
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
Button Operation
“+” “–” Button: Temperature setting button; If you need setting the temperature
of middle chamber, press the button one time, the screen of middle chamber
will be flashing, then press “+” or “-” to set the temperature of middle chamber, setting
range is between 5~12 or 41~54. If you need setting the temperature of
lower chamber, press the button two times, the screen of lower chamber will
be flashing, press “+” or “-” to set the temperature of lower chamber, setting range is
between 12~18 or 54~64.
· LIGHT ButtonCabinet light control button; Note: Once the light is turned on, it will
automatically shut off after 10 minutes in order to protect the wines inside.
· ON/OFF buttonPower on and off button; Press the button for 3 seconds, to start;
press it 3 seconds again, to stop.

Related product manuals