To Next PageTo Next Page
Need help?Do you have a question about the Land Pride RCF3096 and is the answer not in the manual?
General| Model | RCF3096 |
|---|---|
| Type | Rotary Cutter |
| Deck Thickness | 7 gauge |
| Blades | 2 |
| Cutting Width | 96 inches |
| Blade Tip Speed | 15, 000 fpm |
| Driveline Protection | Slip Clutch |
| Hitch | Category II |
| Deck Type | Flat |
| Gearbox | Cast Iron |
Section to record dealer contact information for service and support.
Notice regarding cancer and reproductive harm.
General precautions for safe operation and accident prevention.
Explanation of the safety alert symbol and its importance.
Definition of signal words (DANGER, WARNING, CAUTION) indicating hazard levels.
Guidelines to prevent child access and ensure their safety around equipment.
Procedure for safely shutting down and storing the tractor and implement.
Precautions and guidelines for safe tire maintenance and handling.
Guidelines for safe transportation of the implement on roads and inclines.
Instructions for properly using a safety chain for towing.
General guidelines for performing safe maintenance procedures.
Recommendations for emergency preparedness, including first aid and contacts.
Guidance on selecting and using appropriate personal protective equipment.
Warnings and precautions when working with high-pressure hydraulic fluids.
Recommendations for using lights and devices when operating on public roads.
Importance of contacting utility companies before digging.
Recommendation to use seat belts and Roll-Over Protective Structures (ROPS).
Prohibition of carrying riders on tractors or implements.
Instructions on maintaining and understanding safety labels on the equipment.
Overview of the rotary cutter's intended use and capabilities.
Guidance on how to effectively use the operator's manual.
Information on obtaining customer service and warranty registration.
Instructions on locating and recording the serial number for service.
Contact information for additional support from Land Pride.
Specifications for tractor horsepower and weight compatibility.
Information on the 3-point hitch system and its stabilization.
Important steps for dealers before assembling the cutter.
A list of checks and items needed for proper cutter assembly.
Instructions for installing the vented dipstick for the gearbox.
Reference to torque values chart for proper hardware tightening.
Essential steps for safely shutting down the tractor before maintenance.
Introduction to the different cutter hitch types available.
Detailed instructions for assembling 3-point mounted rotary cutters.
Step-by-step guide for assembling the 3-point hitch mechanism.
Instructions for installing the spring hose loop for 3-point cutters.
Procedure for installing the driveline on 3-point mounted cutters.
Assembly instructions for the tailwheel on RCF3096 3-point models.
Assembly instructions for the tailwheel on RCF(M)3010 3-point models.
Guide for hitching the RCF(M)3096 cutter to a tractor using a 3-point hitch.
Guide for hitching the RCF(M)3010 cutter to a tractor using a 3-point hitch.
Procedure for connecting the driveline to the tractor's PTO shaft.
Instructions for connecting hydraulic hoses for 3-point cutters.
Details on modifying hitch pins for specific tractor hitch categories.
Guide for hitching semi-mount cutters to a tractor.
Procedure for connecting the driveline on semi-mount cutters.
Instructions for connecting hydraulic hoses for semi-mount cutters.
Procedure to check driveline length to prevent structural damage.
Procedure to check driveline angles and clearance during operation.
Detailed instructions for assembling pull-type rotary cutters.
Description of available tailwheel lift mechanisms for pull-type cutters.
Instructions for assembling the axle and hubs on pull-type cutters.
Instructions for installing the spring hose loop for pull-type cutters.
Instructions for assembling the tongue and level rods on pull-type cutters.
Instructions for installing and attaching the park jack.
Instructions for installing the Equal Angle driveline on pull-type cutters.
Instructions for installing the Constant Velocity driveline on pull-type cutters.
Guide for hitching pull-type cutters to a tractor.
Instructions for properly attaching the safety chain for pull-type towing.
Instructions for connecting hydraulic hoses for pull-type cutters.
Procedure for purging air from the hydraulic system on pull-type cutters.
Instructions for installing optional chain safety guards for protection.
Details on attaching front chain guards to the cutter deck.
Instructions for installing the rear chain guard.
Instructions for installing optional rubber safety guards.
Details on attaching front rubber guards and reflector brackets.
Instructions for attaching rear rubber guards and straps.
Overview of available hitch options for pull-type cutters.
Description of the swivel clevis hitch and its features.
Description of the self-leveling Land Pride Performance Hitch.
Procedure for changing between different hitch types.
Instructions for installing and adjusting check chains for cutting height.
Procedure to adjust the park jack for vertical alignment.
Instructions for leveling and setting cutting height for 3-point cutters with beam arms.
Instructions for leveling and setting cutting height for 3-point/semi-mount cutters with rear axles.
Instructions for leveling and setting cutting height for pull-type cutters with rear axles.
List of pre-operation checks to ensure safe and proper functioning.
Crucial safety warnings and precautions for operating the cutter.
Pre-operation inspection checklist for the tractor and the cutter.
Guidelines and warnings for safely transporting the rotary cutter.
Procedures for safely engaging and disengaging the cutter blades.
Best practices and safety advice for operating the cutter in the field.
Safe methods for crossing ditches and banks to prevent damage.
Recommendations for safe turning angles to protect the driveline.
Step-by-step instructions for safely unhooking 3-point or semi-mount cutters.
Step-by-step instructions for safely unhooking pull-type cutters.
Comprehensive guide to operating the rotary cutter effectively and safely.
General advice on maintaining the implement for longevity and performance.
Tips for maintaining the hydraulic system to prevent problems.
Guidelines for safe tire inspection, maintenance, and inflation.
Instructions for inspecting, sharpening, and replacing cutter blades.
Information on the slip-clutch, its function, run-in procedure, and inspection.
Lubrication points and procedure for tailwheel spindle tubes.
Lubrication points and procedure for tailwheel hubs.
Lubrication points and procedure for the ratchet jack.
Instructions for checking and filling the main gearbox oil level.
Instructions for checking and filling the T-Gearbox oil level.
Lubrication points for the pull-type hitch.
Lubrication points for the pillow block bearing.
Lubrication points for driveline U-joints and profile shields.
Lubrication points for CV driveline U-joints and profile shields.
Lubrication points for telescoping driveline profiles with zerks.
Lubrication points for telescoping driveline profiles without zerks.
Lubrication points for RCF(M)3096 dual end flex couplers.
Lubrication points for RCF(M)3010 dual end flex couplers.
Lubrication points for RCF(M)3010 single end flex couplers.
A guide to identifying and resolving common problems with the rotary cutter.
Table of recommended torque values for various bolt sizes and grades.
Specific torque values for flex coupler nuts and blade bolts.
Recommended tire inflation pressure for the 29" AC Tire.
