To Next PageTo Next PageWhat causes excessive skid shoe wear on my Land Pride Brush Cutter?
If you notice excessive skid shoe wear on your Land Pride Brush Cutter, it may be because the cutting height is not level, a blade is missing, the soil is abrasive, or you are cutting too low. Adjust the deck height or replace the missing blade. You may also need to raise the cutting height.
Why are the blades coming loose on my Land Pride Brush Cutter?
If the blades on your Land Pride Brush Cutter are coming loose, it could be due to insufficient shimming. Add shimming as described in the manual. Alternatively, the blade bolts may not be tightened properly. Torque the blade bolt nuts to 600 ft lbs.
General| Brand | Land Pride |
|---|---|
| Model | RCP2660 |
| Category | Lawn Mower |
| Language | English |
General precautions for safe operation and accident prevention.
Understanding the safety alert symbol and its importance.
Ensuring children's safety around operating equipment.
Proper procedures for safely shutting down and storing the tractor.
Specifications for tractors compatible with the rotary cutter.
Pre-operation checks to ensure safe and proper functioning.
How the breakaway feature works and how to reset it.
Key operational considerations for expert cutter use.
Fundamental steps for operating the rotary cutter.
General advice on servicing and maintaining the implement.
Inspection, sharpening, and replacement of cutting blades.
Diagrams and intervals for lubricating various components.
Common problems, their causes, and recommended solutions.
