Do you have a question about the Land Pride FDR3690 and is the answer not in the manual?
Number of Blades | 3 |
---|---|
Weight | 1, 280 lb. |
Power Requirement | 35-70 hp |
Deck Thickness | 7 gauge |
Cutting Width | 90 inches |
Cutting Height | 1 to 5 inches |
Hitch | Category 1 |
Deck Type | Welded Steel |
General safety precautions and best practices for equipment operation.
Guidance on understanding hazard symbols and signal words.
Procedures for safely shutting down and storing the tractor and implement.
Recommended protective gear and clothing for safe operation.
Warnings and procedures for handling hydraulic fluid hazards safely.
Importance of seat belts and ROPS for operator safety during operation.
Information on the location, care, and replacement of safety labels.
Step-by-step guide for connecting the mower to the tractor hitch.
Steps for connecting the driveline to the tractor PTO and mower gearbox.
Procedure to check driveline length for safe operation and prevent damage.
Instructions for shortening the driveline if it is too long.
How to check for driveline interference during mower operation.
Adjusting the gauge wheel axle position to set cutting height.
Critical safety warnings covering operation, maintenance, and hazards.
Instructions for sharpening, balancing, and replacing mower blades.
Detailed technical specifications and capacities for the FDR3690 mower.
Details of the warranty coverage, terms, and conditions for the mower.