To Next PageTo Next Page
Need help?Do you have a question about the Land Pride ZXT54 and is the answer not in the manual?
General| Model | ZXT54 |
|---|---|
| Type | Zero Turn Mower |
| Cutting Width | 54 inches |
| Engine Power | 24 hp |
| Drive Type | Hydrostatic |
| Engine Manufacturer | Kawasaki |
| Engine Model | FR691V |
| Transmission Manufacturer | Hydro-Gear |
| Deck Material | Steel |
| Engine Type | V-Twin |
| Cutting Height Range | 1.5 to 5 inches |
General safety guidelines for operating the mower.
Explains signal words like DANGER, WARNING, CAUTION.
Read and understand safety labels for safe operation.
Procedures for safely shutting down and storing the mower.
Guidelines for performing maintenance safely.
Warning against allowing riders on the mower.
Precautions for working with pressurized hydraulic fluids.
Safety preparations for emergency situations like fires.
Recommendations for personal protective equipment.
Safety procedures for tire changing and inflation.
Information on locating, understanding, and maintaining safety labels.
Hazards associated with moving parts of the mower.
General warnings for safe operation of the mower.
Safety precautions related to the fuel tank.
Hazards related to rotating mower blades.
Importance of the discharge deflector for safety.
Hazards associated with mower rollovers on slopes.
Warning about operating with missing guards.
Safety warning related to the mower battery.
Warning against using a power washer on the unit.
Describes the intended uses of the mower.
Guidance on how to effectively use the operator's manual.
Defines terms used in the manual.
Provides definitions for important terms.
Information on getting help and service for the mower.
How to locate and record the mower's serial number.
Steps to take if further assistance is needed after contacting the dealer.
Steps for safely removing the mower from its shipping crate.
Instructions for attaching the discharge chute to the deck.
Instructions for assembling or adjusting the Folding ROPS.
Instructions for installing the mower's hitch plate.
General guidance on bolt torque values for assembly.
Steps for connecting the mower's battery cables safely.
Procedures for preparing the engine before initial operation.
Identifies and describes key features of the mower.
A list of checks to perform before operating the mower.
Overview of the mower's instrument panel.
Explanation of the engine oil pressure warning light.
Description of the hour meter and its function.
General overview of mower controls.
Operation of the mower's ignition switch.
How to use the throttle control for engine speed.
Operation of the choke for starting the engine.
How to engage and disengage the mower blades.
Operation of the fuel tank selector valve.
How to engage and disengage the park brake.
Description of control lever operation for steering and speed.
How to use the deck lift pedal to adjust cutting height.
Step-by-step procedure for starting the mower engine.
Correct procedure for shutting down the mower engine.
Explanation of the safety interlock system and its checks.
General guidance on operating the mower.
How to start moving and increase the mower's speed.
Procedures for slowing down and stopping the mower.
Instructions on how to steer the mower in various situations.
How to move the mower manually if the engine stalls.
General safety precautions for operating the mower.
Tips and information for effective mower operation.
Adjustments related to the mower's steering system.
How to adjust the steering to prevent neutral creep.
General information on torque values for adjustments.
Adjusting control lever stops for pump protection and straight driving.
Specific procedure to adjust stops to protect pumps.
Procedure to adjust stops for straight mower operation.
Adjusting steering dampeners for proper lever return.
Adjusting the height of the control levers.
Adjusting upper control levers for operator comfort.
Adjusting control levers for operator reach preference.
Adjusting control levers for straight forward travel.
How to adjust the operator's seat and arm rests.
Adjusting the tension of the ground drive belt.
Adjusting the tension of the deck drive belt.
Overview of deck adjustments required.
Procedures for leveling the mower deck.
Adjusting the deck height gauge bar.
Adjusting deck level on the left side.
Adjusting deck level on the right side.
How to set the mower's cutting height.
Adjusting the deck height for proper cutting.
Adjusting anti-scalp rollers for deck protection.
How to adjust the mower's park brake.
Information on the front axle pivot function.
Procedure to lock the front axle pivot.
Procedure to unlock the front axle pivot.
Description of the optional folding soft top canopy.
Information on the optional snow plow attachment.
Description of the optional light kit.
Description of the optional screw jack accessory.
Information on the optional ZXT striping kit.
Description of the optional mulching kit.
Description of the optional inductive tachometer.
General advice on regular maintenance.
Safety precautions for performing maintenance.
Specific torque requirements for critical components.
A schedule of maintenance tasks based on operating hours.
Identifies locations of key maintenance components.
Overview of the mower's electrical system and components.
Information on the mower's hydrostatic drive system.
How to check and maintain the hydraulic oil level.
Procedures for changing hydraulic oil and filters.
Safety and maintenance for the mower's fuel system.
Overview of the evaporative emission control system.
Procedures for replacing the fuel filter.
General maintenance recommendations for the engine.
How to check and change engine oil and filter.
Specific oil check procedure for Honda/Kawasaki engines.
Specific oil check procedure for Briggs & Stratton engines.
General information on the engine air filter.
Maintenance for Briggs & Stratton air filters.
Maintenance for Honda & Kawasaki air filters.
Information about the burp valve in the air filter system.
Proper handling and maintenance of air filters.
Common mistakes during air filter installation.
How the air filtering system can get damaged.
Importance of using correct air filter elements.
General guidelines for maintaining mower belts.
Steps to remove and install the deck drive belt.
Steps to remove and install the ground drive belt.
General maintenance for mower blades.
How to inspect mower blades for damage or wear.
Procedures for removing and installing cutting blades.
How to sharpen mower blades correctly.
Steps for storing the mower for extended periods.
Service required before starting mower after storage.
Identifies specific lubrication points on the mower.
Detailed specifications for mower engines.
Specifications for the hydrostatic transmission.
General technical specifications for the mower models.
Table of torque values for various bolt sizes.
Specific torque values for critical mower components.
Recommended tire inflation pressures for drive and caster wheels.
List and diagram of evaporative emission control components.
