Need help?Do you have a question about the Land Pride ZT72 and is the answer not in the manual?
General| Blade Tip Speed | 18, 500 fpm |
|---|---|
| Spindle Material | Cast Iron |
| Forward Speed | 10 mph |
| Reverse Speed | 5 mph |
| Cutting Width | 72 inches |
| Cutting Height | 1.5" - 5.0" |
| Engine Options | Kawasaki FX |
| Warranty | 3-Year |
Provides essential specifications and capacities for ZT60 and ZT72 mowers.
Details engine manufacturer, horsepower, model, torque, cooling, and type for both models.
Outlines details of the hydrostatic drive system, including pumps and oil.
Covers general mower dimensions, weight, tires, deck, and controls.
Identifies key maintenance points and outlines a comprehensive maintenance schedule.
Covers tire inflation, checks, and basic electrical system components and fuses.
Details checking and changing hydraulic oil and filters for the drive system.
Explains fuel system precautions, fuel filter replacement, and tank draining procedures.
Covers general engine care, oil changes, and air filter inspection/replacement.
Provides instructions for replacing deck drive belts and ground drive belts.
Details inspection, removal, sharpening, and balancing of mower blades.
Outlines procedures for storing the mower and preparing the engine for storage.
Identifies specific lubrication points on the mower and their required intervals.
Provides detailed torque specifications for various hydraulic fittings and adapters.
Highlights safety advice and how to adjust for mower creep.
Details adjusting lever stops, steering dampeners, and park brakes.
Covers seat adjustment and fine-tuning of control levers for operator comfort.
Details how to adjust the ground and deck drive belt tensions.
Explains how to check and adjust mower deck leveling and cutting height.
Describes the function and adjustment of anti-scalp rollers and front axle pivot.
Refers to OEM manuals for specific engine adjustments and lists engine models.
Details clutch guard removal, clutch removal, and clutch installation procedures.
Step-by-step guides for removing and installing the engine.
Instructions for removing and installing the muffler.
Details procedures for removing the left and right fuel tanks.
Provides instructions for hydraulic pump removal and installation.
Provides instructions for hydraulic motor removal and installation.
Explains how to purge and prime the hydraulic pumps for proper operation.
Instructions for manually moving the mower when the engine is inoperable.
Outlines steps and tools for testing hydraulic pump performance.
Details the procedures for removing and installing the brake solenoid.
Provides wiring diagrams for Honda and Kawasaki engines.
A comprehensive flowchart for diagnosing electrical system issues.
Details troubleshooting procedures for operator presence circuit failures.
Step-by-step guide for replacing front caster wheel bearings.
Details the removal and reassembly of steering control components.
To Next Page