To Next PageTo Next Page
Need help?Do you have a question about the Land Pride ZT60 and is the answer not in the manual?
Engine| engine | Briggs & Stratton, Honda, Air Cooled |
|---|---|
| cutting height | 1 1/2” - 4 1/2” in 1/4” Increments |
Blade Specifications| blade tip speed | 44: 16, 811 fpm; 52: 18, 937 fpm |
|---|---|
| blade belt | Single V-Belt B-Section with Kevlar |
| blade spindles | 1” with Cast Housing, Upper & Lower Greaseable Bearings |
Tires| front tires | 11 x 4 - 5, Rib Tread |
|---|---|
| rear drive tires | 44: 18 x 8.5 - 8, Turf Tread; 52: 18 x 9.5 - 8, Turf Tread |
Power and Performance| ignition | 12 Volt Solid State |
|---|---|
| fuel capacity | 12 U.S. Gallons |
| ground speed | Forward 0-7 mph, Reverse 0-5 mph |
Dimensions| overall width with discharge chute up | 44: 49” 52: 56” |
|---|---|
| tire to tire width | 44: 43” 52: 44” |
| deck thickness | 11 Gauge with Reinforcements |
Engine| engine | Honda, Kawasaki or Kohler, Air Cooled |
|---|---|
| cutting height | 1” - 5” in 1/4” Increments |
Blade Specifications| blade tip speed | 60 Deck: 18, 768 fpm; 72 Deck: 18, 574 fpm |
|---|---|
| blade belt | Single V-Belt B-Section with Kevlar |
| blade spindles | 1” with Cast Housing, Upper & Lower Greaseable Bearings |
Tires| front tires | 13 x 6.50 - 6, Rib Tread |
|---|---|
| rear drive tires | 24 x 12.00 - 12, Turf Tread |
Power and Performance| ignition | 12 Volt Solid State |
|---|---|
| fuel capacity | 12 U.S. Gallons |
| ground speed | Forward 0-11 mph, Reverse 0-5 mph |
Dimensions| overall width with discharge chute up | 60: 69” 72: 81” |
|---|---|
| deck thickness | 10 Gauge with Reinforcements |
Essential practices to follow for safe operation and accident prevention.
Explains hazard signal words like DANGER, WARNING, and CAUTION.
A pre-operation checklist to ensure the mower is ready for safe use.
Detailed explanation of using the control levers for steering and speed.
How the safety interlock system prevents accidental starting or operation.
Step-by-step instructions for starting the mower's engine safely.
General instructions and precautions for operating the mower.
How to initiate forward movement and control speed.
Methods for slowing down and stopping the mower safely.
Techniques for steering the mower in various conditions and turns.
Comprehensive safety guidelines for operating the zero-turn mower.
Specific instructions for operating the mower deck effectively and safely.
Procedures for ensuring the mower deck is level and set to the correct height.
How to set and adjust the mower deck's cutting height.
General overview of recommended maintenance practices for longevity.
Importance of proper torque specifications for critical fasteners.
A detailed schedule of maintenance tasks and their intervals.
How to check and maintain the hydraulic oil level in the drive systems.
Procedures for changing hydraulic oil and filters.
Important safety and operational information regarding the fuel system.
Reference to engine manufacturer's recommendations for maintenance.
Procedures for checking and changing engine oil and filter.
Maintenance and replacement of the engine air filter element.
Guidelines for inspecting and replacing drive belts.
Step-by-step instructions for removing and installing the deck drive belt.
Step-by-step instructions for removing and installing the ground drive belt.
Procedures for inspecting, removing, installing, and sharpening mower blades.
How to inspect mower blades for damage and wear.
Steps for safely removing and installing mower blades.
Techniques and guidelines for sharpening mower blades.
A chart providing torque specifications for various bolts and fasteners.
