Need help?Do you have a question about the Land Pride ZT60 and is the answer not in the manual?
Engine| engine | Briggs & Stratton, Honda, Air Cooled |
|---|---|
| cutting height | 1 1/2” - 4 1/2” in 1/4” Increments |
Blade Specifications| blade tip speed | 44: 16, 811 fpm; 52: 18, 937 fpm |
|---|---|
| blade belt | Single V-Belt B-Section with Kevlar |
| blade spindles | 1” with Cast Housing, Upper & Lower Greaseable Bearings |
Tires| front tires | 11 x 4 - 5, Rib Tread |
|---|---|
| rear drive tires | 44: 18 x 8.5 - 8, Turf Tread; 52: 18 x 9.5 - 8, Turf Tread |
Power and Performance| ignition | 12 Volt Solid State |
|---|---|
| fuel capacity | 12 U.S. Gallons |
| ground speed | Forward 0-7 mph, Reverse 0-5 mph |
Dimensions| overall width with discharge chute up | 44: 49” 52: 56” |
|---|---|
| tire to tire width | 44: 43” 52: 44” |
| deck thickness | 11 Gauge with Reinforcements |
Engine| engine | Honda, Kawasaki or Kohler, Air Cooled |
|---|---|
| cutting height | 1” - 5” in 1/4” Increments |
Blade Specifications| blade tip speed | 60 Deck: 18, 768 fpm; 72 Deck: 18, 574 fpm |
|---|---|
| blade belt | Single V-Belt B-Section with Kevlar |
| blade spindles | 1” with Cast Housing, Upper & Lower Greaseable Bearings |
Tires| front tires | 13 x 6.50 - 6, Rib Tread |
|---|---|
| rear drive tires | 24 x 12.00 - 12, Turf Tread |
Power and Performance| ignition | 12 Volt Solid State |
|---|---|
| fuel capacity | 12 U.S. Gallons |
| ground speed | Forward 0-11 mph, Reverse 0-5 mph |
Dimensions| overall width with discharge chute up | 60: 69” 72: 81” |
|---|---|
| deck thickness | 10 Gauge with Reinforcements |
To Next Page
