What to do if my Landa PDE2-1500 motor hums but doesn't run?
If your Landa Pressure Washer motor hums but doesn't run when switched on, it could be due to insufficient main voltage. Make sure the power supply is adequate. Alternatively, the pump may be stuck or frozen; try turning the motor manually to check.
Why is water dripping from the pump protector of my Landa Pressure Washer?
Water dripping from the pump protector of your Landa Pressure Washer may be due to a water supply pressure that is too high (over 90 psi). Use a regulator to lower the water supply pressure. It can also happen if the spray gun is in the off position for over 5 minutes; in this case, turn the machine off if it's not in use for more than 5 minutes.
Why is there water in the pump oil of my Landa Pressure Washer?
The presence of water in the pump oil of your Landa Pressure Washer could be due to a worn oil seal, high humidity in the air, or worn piston packing. Check these components and replace them if necessary.
Why is water dripping from under my Landa PDE2-1500 pump?
Water dripping from under the pump of your Landa Pressure Washer can be due to worn piston packing or a worn O-ring plunger retainer. Check these parts and replace if necessary.
Why does my Landa PDE2-1500 motor keep stopping?
If your Landa Pressure Washer motor stops, it may be due to a tripped thermal overload caused by overheating. Ensure the main voltage matches the specifications for your unit. Wait a few minutes and then reset the GFCI cord to restart the machine.
Why is my Landa Pressure Washer pump so noisy?
A noisy pump in your Landa Pressure Washer can stem from several causes. There might be air in the suction line, so check the water supply and connections. A broken or weak suction or delivery valve spring could also be the culprit. Foreign matter in the valves, worn bearings, or excessive water temperature (above 160°F) can also cause the pump to be noisy. Inspect and clean or replace the affected components.
What to do if my Landa PDE2-1500 has low pressure after normal use?
If your Landa Pressure Washer's pressure is low after a period of normal use, the nozzle might be worn and needs replacement. Also, the suction or delivery valves could be worn, or the lines could be blocked, requiring cleaning. A worn unloader valve seat or worn piston packing could also cause low pressure. Furthermore, excessive water temperature could be the issue; reduce it to below 160°F. Check and replace parts as necessary.
General| Brand | Landa |
|---|---|
| Model | PDE2-1500 |
| Category | Pressure Washer |
| Language | English |
Details user's obligation to understand and maintain manual for safe operation.
Provides critical safety warnings and precautions for operating the pressure washer.
Highlights specific safety warnings for spray gun, freezing, ladder use, and electrical hazards.
Identifies key parts of the pressure washer through labels and descriptions.
Details the sequential steps for assembling the pressure washer components.
Guides users through the process of starting and operating the pressure washer.
Explains the different color-coded nozzles and their applications.
Explains the function of the thermal pump protector.
Offers advice on cleaning surfaces, including precautions and recommended practices.
Details how to apply detergent and the rinsing process after use.
Outlines the steps for safely shutting down and cleaning the pressure washer.
Provides guidelines for storing the pressure washer to prevent damage, especially from freezing.
Lists common problems, their causes, and recommended solutions for the pressure washer.
Details the recommended schedule for various maintenance tasks.
Provides a log for recording oil changes and operating hours.
Illustrates the assembly of specific pressure washer models with numbered parts.
Lists part numbers and descriptions corresponding to the exploded view diagram.
Illustrates the assembly of specific pressure washer models with numbered parts.
Lists part numbers and descriptions corresponding to the exploded view diagram.
Provides detailed technical specifications for various pressure washer models.
Illustrates the assembly of the LE.1 Series pump with numbered parts.
Lists part numbers and descriptions for the LE.1 Series pump and repair kits.
Illustrates the assembly of the RKA pump with numbered parts.
Lists part numbers and descriptions for the RKA pump, including special parts.
Illustrates the assembly of the UU1 unloader with numbered parts.
Lists part numbers and descriptions for the UU1 unloader and repair kits.
Illustrates the assembly of the AR-20242G unloader valve with numbered parts.
Lists part numbers and descriptions for the AR-20242G unloader valve.
Illustrates the assembly of the hose and spray gun with numbered parts.
Lists part numbers and descriptions for the hose and spray gun assembly.
Details what is covered, excluded, and terms for Landa warranty.
Explains how to get warranty service and Landa's liability limitations.
To Next Page
