P
Patrick JohnsonAug 17, 2025
Why is the pressure fluctuating on my Landa Pressure Washer?
- JJacob ChapmanAug 17, 2025
If your Landa Pressure Washer is experiencing fluctuating pressure, several components could be the cause. Start by checking the valves for wear or blockages and replace them if necessary. Inspect the pump for air leaks, paying attention to the water supply and joints in the suction line. Also, examine the piston packing for wear and replace it if needed. If operating the pressure washer at altitudes above 1000 feet, it may be necessary to adjust the engine. Contact your local authorized engine sales and service center for details.