MAINTENANCE AND LUBRICATION
3-5
TABLE OF CONTENTS
Table 4-3: Hydraulic Engine Maintenance Schedule
WARNING
HYDRAULIC ENGINE MAINTENANCE SCHEDULE
OPERATION
AFTER EACH CYCLE OF INDICATED HOURS
8 25 100 200
FILL FUEL TANK
X
CHECK OIL LEVEL X
CHECK AIR CLEANER FOR DIRTY, LOOSE, OR DAMAGED
PARTS
*X
CHECK AIR INTAKE AND COOLING AREAS, CLEAN AS
NECESSARY
*X
SERVICE PRECLEANER ELEMENT *X
SERVICE AIR CLEANER ELEMENT *X
CHANGE OIL X
CHECK SPARK PLUG CONDITION AND GAP X
REMOVE COOLING SHROUDS AND CLEAN COOLING
AREAS
X
CHANGE OIL FILTER X
NOTES:
*PERFORM THESE MAINTENANCE PROCEDURES MORE FREQUENTLY UNDER EXTREMELY DUSTY, DIRTY
CONDITIONS.
Breathing exhaust gases can result in severe
personal injury or death. Do not use air cleaner,
exhaust elbow, or connecting parts as a
supporting step. Damage to these and
connecting parts can cause an exhaust leak.
To Next Page
Loading...