Need help?Do you have a question about the Landoll VT PLUS 7430 and is the answer not in the manual?
General| Brand | Landoll |
|---|---|
| Model | VT PLUS 7430 |
| Category | Farm Equipment |
| Language | English |
Identifies potential injury hazards and alerts users to obey safety messages.
Indicates an imminently hazardous situation resulting in death or serious injury if not avoided.
Indicates a potentially hazardous situation resulting in death or serious injury if not avoided.
Indicates a potentially hazardous situation resulting in minor or moderate injury if not avoided.
Details the installation of the main frame and hitch components.
Instructions for assembling the leveling mechanism for the implement.
Steps for installing the manual adjustment mechanism for leveling.
Procedure for installing the optional hydraulic leveling system.
Installation guide for the hydraulic depth stop mechanism.
Instructions for mounting the fold cylinders on various models.
Procedure for attaching the disc gang assemblies to the frame.
Steps for attaching the wing frames and associated components.
Guidance on connecting hydraulic systems for lift and fold functions.
Steps for installing the lighting system and SMV bracket.
Instructions for installing the conditioner reel assembly.
Procedure for installing the rear jack assembly.
Procedures for completing the implement assembly and initial checks.
Steps to prepare the tractor for attachment and operation of the implement.
Initial inspection and checks of the implement before operation.
Procedures for connecting the implement to the tractor hitch.
Information on the rephasing hydraulic lift system operation and maintenance.
Instructions for operating and maintaining the hydraulic fold system.
Guidelines for operating the implement in the field.
How to adjust the implement for side-to-side levelness.
How to adjust the implement for front-to-rear levelness.
Procedures for adjusting the implement hitch for proper draft line.
Instructions for adjusting the disc scrapers for optimal performance.
Details on adjusting the front gauge wheels for depth control.
Information regarding the disc blades used on the implement.
How to adjust the depth stop for controlling operating depth.
Procedures for checking and maintaining wheel bearings.
Guidelines for maintaining the implement's hydraulic system.
Safety and procedural guidelines for transporting the implement.
Schedule and procedures for lubricating machine components.
Recommendations for proper off-season storage of the implement.
Addresses issues where the unit leaves a center ridge.
Solutions for problems causing a center furrow.
Troubleshooting for uneven leveling on the outer parts of the unit.
Solutions for problems causing inconsistent operating depth.
Diagnosing and resolving issues causing side movement or drafts.
Addresses problems related to frame buckling or unevenness.
Troubleshooting steps for wheel bearing failures.
Troubleshooting steps for lift cylinders not extending fully.
Diagnosing causes for the entire unit settling.
Troubleshooting for unit settling with one wing raising.
Diagnosing and resolving issues with wing settling.
Causes and solutions for disc gangs becoming plugged.
Troubleshooting for disc gangs that won't turn or push soil.
Resolving issues with disc gang bearing snap rings popping out.
Addressing scraper buildup with soil or residue.
Troubleshooting loose disc blades or shearing roll pins.
Diagnosing and resolving issues with conditioner reels plugging.
To Next Page
