Laney CUB-SUPER12 - CUB-SUPERTOP Rear Panel Features; Rear Panel Controls

CUB-RANGE
USER MANUAL
www.laney.co.uk
8
9- REVERB - Sets the level of the on board reverb. The on board reverb is a high-quality spring reverb
algorithm used in the acclaimed BCC-SECRET PATH reverb engine.
10 - VOLUME - Controls the overall listening volume of the amplier and is used in conjunction with the
Gain control (6).
11 - POWER SWITCH & LAMP - Indicates that the amplier is powered up and ready to play.
12 - POWER SOCKET - Plug in the supplied IEC power cord here
13 - FOOTSWITCH SOCKET - This is where you plug in the footswitch. FS2-Mini optional extra. Enables
remote switching of the boost circuit. Ensure the boost switch (7) is switched in.
14 - FX LOOP RETURN - This is where you plug the OUT of your Eect(s). Use a high quality shielded
guitar cable.
15 - FX LOOP SEND - This is where you plug the INPUT of your Eect(s). Use a high quality shielded
guitar cable. This socket can also be used as a line out.
16 - EXTERNAL SPEAKER. - Connect an external cabinet (8 - 16 Ohms) here. Please use a
good quality SPEAKER cable. Try the CUB-212 & CUB-112 cabinets.
13 12
14
15
16
CUB-SUPERTOP FEATURES