7
In order to reduce environmental damage, at the end of its useful life, this product must not be disposed of along with normal Household
waste to landfill sites. It must be taken to an approved recycling centre according to the recommendations of the
WEEE (Waste Electrical and Electronic Equipment) directive applicable in your country.
This product conforms to the requirements of the following European Regulations, Directives & Rules:-
CE Mark (93/68/EEC), Low Voltage (72/23/EEC), EMC (2004/108/EEC),
RoHS (EU2002/95/EC), WEEE (EU2002/96/EC)
In the interest of continued development, Laney reserves the right to amend product specification without prior notification.
SPECIFICATIONS
~120V
~220V>~240V
No Yes - Comfortable Contoured Grip
12Kg 17KgPacked Weight
RB2 RB3
~120V, ~220V, ~230V, ~240V 50/60Hz
403*308*326 (H*W*D) 468*455*367 (H*W*D)
10.5Kg 15Kg
Size
Unit Weight
Side Handles
Supply Voltage on all models:- Factory
Preset
Mains Fuse:
Power Consumption
Output Power Rating
Loudspeaker
1M Ohm/100pF
T1A L
T500mA L
50W
30W
10” Custom Designed Driver
Normal & Hi Inputs
Switchable compressor
Treble (±12dB at 3.5KHz, Shelving)
Clip Distortion Limiter
T3.15A L
T1.6A L
Input Impedance
Features:
EQ
D.I.
AUX IN
Headphone Socket
FX Loop
1M Ohm/100pF
Balanced XLR
3.5mm Stereo Skt
3.5mm Stereo Skt
Yes - (0dBu Nominal) (Series-Insert)
Switchable compressor
Bass (±12dB at 65Hz, Shelving)
Paramid (±12dB at 200Hz > 2KHz Peaking)
Treble (±12dB at 3.5KHz, Shelving)
Clip Distortion Limiter
120W
65W
12” Custom Designed Driver
Normal & Hi Inputs
Balanced XLR
No
Bass (±12dB at 65Hz, Shelving)
Paramid (±12dB at 200Hz > 2KHz Peaking)
3.5mm Stereo Skt
3.5mm Stereo Skt
To Next Page
Loading...
