Need help?Do you have a question about the Laney VC30 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Speaker | 1 x 12" Celestion |
| Reverb | Yes |
| EQ | Bass, Middle, Treble |
| Speaker Configuration | 1 x 12" |
| Effects | Reverb |
| Weight | 22.5 kg |
| Power | 30W |
| Input | 1 x 1/4" Jack |
| Type | Tube |
| Valve Complement | 4 x EL84, 3 x ECC83 |
| Tubes | 4 x EL84, 3 x ECC83 |
Covers numerous safety points for using the amplifier, including water, heat, and power.
Details OSHA limits for sound pressure levels and recommends hearing protection.
Instructions for initial checks, wiring, and ensuring proper power connection.
A personal introduction and welcome from the CEO, Lyndon Laney.
Describes the amplifier's vintage sound, Class A output, and playing versatility.
Explains each knob, switch, and LED on the front panel, including inputs, EQ, and volume.
Details rear panel sockets, fuses, impedance selector, and speaker outputs.
Provides suggested amplifier settings for Clean, Blues, Blues Solo, and Rock styles.
Blank panels provided for users to store and recall their personal amplifier settings.
Tips for proper handling, operation, tube replacement, and connection of tube amplifiers.
A visual representation of the amplifier's internal circuitry and signal path.
Illustrates how to connect the VC30 amplifier with external effects and cabinets.
Lists all technical specifications, including voltage, power, speakers, and dimensions.
To Next Page
