Need help?Do you have a question about the Laney VC30-112-210-212 and is the answer not in the manual?
General| Output Tubes | 4 x EL84 |
|---|---|
| Power | 30W |
| Preamp Tubes | 3 x 12AX7 |
| Channels | 2 (Clean, Overdrive) |
| EQ Controls | Bass, Middle, Treble |
| Effects | Reverb |
| FX Loop | Yes |
| Type | Tube Combo Amplifier |
| Speaker | 2x12" (VC30-212) |
| Controls | Bass, Middle, Treble, Reverb |
Guitar input options for Hi and Lo gain settings.
Control for setting the clean channel's loudness.
Adjusts the preamplifier drive level for a dirtier sound.
Sets the output volume for the drive channel.
Adds brightness and treble emphasis to the sound.
Sets the output volume of the 'Drive' channel.
Indicates when the Drive channel is activated.
Engages the 'Drive' channel.
Passive tone controls for shaping the sound.
Controls the level of the built-in reverb.
Controls signal level from the FX loop return.
Disengages HT voltage to warm tubes.
Main power switch for the unit.
Connects the amplifier to the power source.
Main safety fuse protecting the AC power.
Fuse protecting the DC power to the tubes.
Displays the model and serial number of the unit.
Connects the internal loudspeaker.
Optimizes output for 4 or 8-16 ohm speaker loads.
Connects an 8-16 ohm external speaker cabinet.
Connects output from external effects.
Connects input to external effects.
Connection for remote channel and reverb switching.
Schematic representation of amplifier signal flow.
Recommended procedure for turning equipment on/off.
Guidance on using appropriate cables for speakers.
Advice on user servicing and qualified personnel.
To Next Page
