Lantech G Series - Introduction

INTRODUCTION
5
1.0 Introduction
This manual tells the operator and maintenance personnel how to safely install and operate the
machine. The function of the manual is to make sure that the operator and maintenance personnel
have complete instructions.
1. Introduction
2. Specifications
3. Options
4. Safety
5. Installation
6. Operator Instructions
7. Maintenance
8. Troubleshooting
9. Appendix
10. Parts List and Drawings
The Specifications and Options sections contain data about special options. This is important as
you install and operate the machine.
The Safety section points out the Warnings, Cautions, and Notes and makes sure that all
personnel work in a safe environment.
The Installation and Operator Instructions sections tell you how to install and use the machine
safely and efficiently.
The Maintenance and the Troubleshooting tell you how to make sure that the machine stays at
top performance.
The Appendix section can include the CE Declaration of Conformity, Glossary and Warranty
procedures.
The Parts List and Drawings sections have data on parts.
This manual helps you operate your machine safely and efficiently. The value is to increase your
productivity and decrease packaging costs.